A house becomes a home with several amenities and items and antique furniture are among them. All the antique furniture adds a superior character and fine originality to the home. But time could take a toll on their health, so to save them from extinction, the wise decision is hiring professionals. The professionals know the right steps for the antique accessories to take a rebirth. Whether in Sydney or Southern Highlands, take the help of Google and find out the best antique restoration company.
Steps Followed By the Antique Restoration Professionals
Being skilled in their art, the professionals are experts to add life to the damaged wooden furniture, faded fabrics and remove the entrenched marks and stains to re-polish. They follow each step minutely to repair the accessories.
Step 1 – Stripping Carefully
Stripping is a laborious task, and the professionals first inspect the part to be stripped. For the remaining, they keep it covered with a plastic sheet. Next, they using a brush, they liberally apply the stripper.
Step 2 – Allowing The Layers To Properly Dissolve
The polish and old varnish mix is made that is applied and left for half an hour to dissolve. The coating thickness and composition determine the time for the finish layers to dissolve. Normally, the experts re-spread the entire spread on the layers for the effective finish.
Step 3 – Neutralising The Chemical Stripper
Using a steel wool pad soaked in a mixture of proprietary wax, white spirit, and polish remover and wood grain, the professionals neutralize the wood. They use the right stripper for the specific neutralizer.
Step 4 – Cleaning The Remaining Furniture
After the chemical strippers are neutralized, the professionals dealing with antique restoration in Southern Highland and Sydney use the cotton rags for wiping the residues away. Then they leave it for a complete 24 hours. In the meantime, they remove the old polish and dirt using steel wood pad and wax remover. They start by cleaning small areas. The wax softens after a few minutes. Before it solidifies, they wipe away using a clean cloth.
Step 5 – Returning To The Restoration Area
Once the 24 hours stripping is over, using a sanding block and a fine glasspaper, they smoothen the wood fibers, which came up at the time of the stripping process. To remove the dust and save the finished piece from spoilage, they protect the sheet by shaking and vacuuming. At last, they wipe using a tack cloth.
Step 6 – Tackling Bleached Wood Areas
Just as in Southern Highlands, antique restoration in Sydney is no less different. After treating the restoration area, they apply generous mahogany wood dye using a brush on the bleached wood areas to keep the color uniform. While the stain penetrates, they wipe away the excess.
Step 7 – Improving the Finish and Sheen
After the stain dries, they apply a thick coat of finishing oil with a lint-free cloth and leave it for ten minutes for penetration. The surplus is wiped as it becomes sticky. A further coat is applied after five hours, using 0000-gauge steel wool, at least four times a greater sheen and durability. They make sure to use the right antique restoration materials for a flawless job.
Step 8 – The Ultimate Elegance
The antique restoration service ends with applying good furniture wax in thin coats over the entire table. After one hour they polish using a lint-free cloth. They are careful to keep the furniture away from heat and sunlight since these cause the wood to dry out and wrap and bleach.
Although with time, antique furniture starts to diminish, by coming apart, and losing its luster. Because the furniture is aging, you do not have to replace them with new ones as you have a wonderful opportunity to hire antique restoration professionals. Following the steps, they are sure to renew your adorable antique furniture.